Product Finder
Find products by printer brand and model
Rihac Photo Pro Pigment Ink 100ml
Suits Epson Printers using: 157 Series ink cartridges (T1571-9) Key Features:
Platinum Photo Pro is a high end resin encapsulated pigment ink (K3 Equivalent). Resin encapsulation of the pigment particle results in a reduction of print head clogging, increases UV life and decreases settlement. Head Blockages- In very simplistic terms pigment particles are minerals and as such in microscopic terms they have very solid jagged edges. When these particles travel to the print head they quite literally catch on each other and the jagged edges can cause them to clump together (agglomeration) and form a physical blockage. Resin encapsulation is a process where the pigment particles are encased in a thin layer of acrylic co-polymer. When these balls of pigment reach the print head they 'roll' together and with no jagged edges to catch on they do not block the heads of the printer and are thus a more reliable ink to put through your expensive printer. Increased UV Life- This micro-thin layer around the pigment particles absorbs a level of UV radiation in essence creating an additional layer of protection against UV light. Decreased Settlement- The resin encapsulation insulates the static charge of the pigment particle. Traditional pigment inks are prone to settlement caused in part by the electrical charge of the particles drawing them together much like a magnet. insulating against the static charge better resists settlement. Rihac Platinum Photo Pro inks are an excepionally high quality pigment ink and are used by a number of professional photographers and print production houses. Suitable for Epson Printers: Stylus Photo R3000
Photo Pro Pigment ink - Specifications
Physical Data
Durability testing - inks are tested by freezing to -20c and then heated to 60c. This process repeated over an 4 week period (5 cycles per 24 hours) with no coagulation, crystallization, condensation, sediment or colour change.
Difference
(Within ΔE*ab 0.07 standard deviation )
Test Conditions:
50w UV lamp
45% humidity
18C Temperature
Distance from light source 50cm
Test period of 1 hour
Konica Minolta Coloimeter used for test conducted in house (LAB CIE 1976 colour space). Unlike RGB and CMYK colour modes, LAB colour is designed to approximate human vision.
230gsm non RC photo paper - Best Photo
