Cleaning Fluid for Inkjet Printers
Key Features:
- Suitable for Dye, Pigment or Sublimation Inkjet printers
- Solvent base of 2-Ethoxyethanol & Diethylene Glycol
- 5% Active Enzyme per volume
- De-humidification agent to prevent print head corrosion
- Can remove dried ink from printers and capping stations
- Syringe and tubing provided for cleaning nozzles
- Safe for both Thermal and delicate Piezo heads
- Infuses at atmospheric pressure to diffuse sedimented
ink particles
- REACH and RoHS Compliant
- Material Data Safety Sheet (MSDS) available
Occasionally Inkjet printers may develop minor blockages to the
print heads. A head blockage is identifiable by performing a nozzle
check. Once printed examine the nozzle check pattern and identify
and missing or misaligned lines as
pictured below.
Missing lines can be caused by an air pocket or a blocked print head.
To identify the cause perform a head cleaning cycle followed by a further nozzle
check.
Compare the two nozzle check patterns. If the nozzle gaps have changed
position then
the issue is most likely caused by an air-forge or air pocket in the
cartridge. If the gaps
remain constant then the issue is possibly due to a blocked
print head. Print head blockages can be caused by a variety of different issues.
The most common cause is dried ink inside the head.
If the issue appears to be a blocked print head you will need to clean the
print head.
Full Instructions provided with purchase. Please note with Large Format Printers
you will need a cartridge to use the cleaning fluid.
| 
